1-Port Parallel PCI Host Card

1-Port Parallel PCI Host Card

This UGT-PC10PL is part of a series of I/O card based on the PCI technology. It offers ONE LPT port that enables the user to connect parallel devices. The Parallel (LPT) port offer data transfer rate up to 1.5 Mbps with built-in ECP/EPP/SPP/BPP auto switching operation modes to give you maximum system performance and efficiency via DB25 pin female connector. This card is the best solution for your Centronics peripherals. The UGT-PC10PL is design to be easy and simple to use for commercial, office and home use. This card is designed to meet PCI local bus specification rev. 2.3 and with the standard or low profile brackets can be installed virtually in any PC with all major operating systems. The I/O address and IRQ are automatically configured to simplify the installation at the same time offers a reliable and high performance solution for Parallel Communication.

Email Bookmark and Share

flyer user guide driver


  • Compliant with PCI Local Bus Specification, Revision 2.3
  • Add one IEEE 1284 Parallel Port on system
  • Easy Plug and Play
  • Automatic selects IRQ & I/O address
  • Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced Capability Port (ECP)
  • Faster data rates up to 1.5Mbytes/sec
  • PCI 32-bit
  • 1 x DB25 female parallel connectors
  • Specifications:

     Model: UGT-PC10PL
     Interface: PCI
     Ports: 1 Parallel Ports (DB25 Female)
     Dimension: 122 x 56 x 18mm

    System Requirements:

  • Windows XP/Vista/7/8/10 (32/64 bit)
  • Available PCI slot
  • Package Contents:

  • 1 x 1-Port Parallel PCI Host Card
  • 1 x Driver CD
  • 1 x User Manual
  • 1 x Low Profile Brackets
  • Related Products

    ©2017 Vantec Thermal Technologies.