SATA/eSATA PCI Host Card |
2-Port eSATA II-150 PCI Host Card
Serial ATA (SATA) is the latest form of computer connectivity, featuring faster transfer speeds, easier configuration, and the ability to hot swap drives. With the Vantec SATA/eSATA PCI Host Controller, you can add the features and functionality of eSATA to your computer. By providing an internal SATA port, the PCI Host Card offers the expandability to add a hard drive to you system. With the external SATA port, both the PCI Host Card gives the flexibility of adding a high speed connection to an external hard drive. Traditionally, one would use USB 2.0 to connect to external hard drives. While USB 2.0 offers reasonably fast speeds at 480Mbps, SATA transfers at a speed of up to 1,500Mbps! Take advantage of SATA on your computer with the Vantec SATA/eSATA PCI Host Card.
Features:
Easily Add SATA / eSATA to Any System with an Open PCI Slot
Transfer Rates Up to 1500Mbps (150MB/s)
Supports Hot-Swapping: Plug & Play without Rebooting
LED Drive Activity Header for Each Port
32 bit, 3/66Mhz fully compliant PCI host interface
Fully compliant with SATA 1.0a specifications
Integrated PCI DMA engines
Compliant with PCI specifications, revision 2.2
Bus architecture: low profile 32bit PCI Bus
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Independent 256-byte FIFOs(32 bit*64 deep) per Serial ATA channel for host reads and writes
Supports spread specturm docking to reduce EMI
1 eSATA Port
1 Internal SATA Port
Specifications:
| Model: | UGT-ST300 |
| Interface: | 32-Bit 33/66MHz PCI v2.2 |
| Connections: | Internal |
External SATA (eSATA) Port |
System Requirements:
Pentium® or Equivalent PC with One Available PCI Slot
Microsoft Windows 98SE/ME/2000/XP
Supports 64bit/32bit Windows Vista
Linux kernel version of 2.4.18-14 or later
Package Contents:
2-Port eSATA II-150 PCI Host Card, Low Profile PCI Bracket, CD Driver, User Manual