Dual Chip 4-Port Dedicated 10Gbps USB 3.1 Gen 2 PCIe Host Card

Home / Products / Add-on Cards / USB / Dual Chip 4-Port Dedicated 10Gbps USB 3.1 Gen 2 PCIe Host Card

Dual Chip 4-Port Dedicated 10Gbps USB 3.1 Gen 2 PCIe Host Card
UGT-PCE470-2C
The Vantec Dual Chip 4-Port Dedicated 10Gbps USB 3.1 Gen 2 PCIe Host Card is design to offer the best USB 3.1 performance possible. This unique design with 2 dedicated USB 3.1 chips provides 2 fast lanes with the maximum bandwidth. With two chips, you can have a total theoretical speed of 20Gbps; this translates in to superfast file transfer and work done. This Dual chip Host card incorporate UASP technology with the aid of the latest OS and UASP devices will further enhances and put the speed into hyper drive. This card comes with additional features, like support for USB Battery Charging specification, Intel XHCI Compliant, PCIe 2.0 x4 interface, built in power connection for LP4/SATA and backward compatibility to all your other slower USB devices.

BUY NOW
- fb
- g+
- tt

Highlight
Spec
Support
FAQ

- Support PCI-Express 2.0 specifications using x4 Connection for faster and wider lanes for speed.
- Provides 2 dedicated USB 3.1 chip for work that requires super-fast data transfer
- Support 10Gbps per chip, with 2 chip to get a total theoretical bandwidth of up to 20Gbps
- Support USB Battery Charging Specification Revision 1.2 for quick smart charge.
- Compliant with Intel’s eXtensible Host Controller Interface (xHCI) Specification Revision 1.0 for compatibility to market standard.
- Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices for backward compatibility with both old and new devices
- Conveniently built-in LP4 and SATA power connector for receiving extra power from system power supply.
- Hot-swapping feature allows you to connect/disconnect devices without powering down the system
- Support UASP Devices on all 4 ports for extra boost in speed.
- Support Windows 7,8.1,10

Model: UGT-PCE470-2C

Device Support: USB 3.1 Type A (backward compatible with USB 3.0/2.0/1.1)
Ports: Four, USB 3.1 Type A ports, each support 5V @ 900mA
USB Controller: Two USB 3.1 Gen 2 controllers (10Gbps)
Note: Each controller (10Gbps) link to two ports to share the 10Gbps

Bus Technology: PCI-Express x4
Power connector: LP4 or SATA power connector
Dimension: 5.0 x 3.5 x 0.8 inches / 128 x 88 x 20 mm

System Requirements:

PCI-Express x4, x8 or x16 slots
Microsoft Windows 7,8.1,10
USB 3.1 devices preferred to get maximum speed

Whats Included: Dual Chip 4-Port Dedicated 10Gbps USB 3.1 Gen 2 PCIe Host Card, Driver CD, Quick Installation Guide

UPC: 844767022659

EAN: 4716872103041

Driver

Manual

Datasheet

NO drivers needed for Windows 8.1/10/11 or newer OS on USB Host Controller [#020419]

Dear User,

Thank you for purchasing this USB Host controller PCIe Addon card.

These products DO NOT require any drivers if you are installing them into a system using Windows 8.1/10/11 or newer.

Microsoft Windows 8.1/10/11 or newer Operating Systems has included the necessary drivers (built-in, native drivers) in the OS.

Do not use the provided CD drivers, it is ONLY needed if you are using Windows 7 or older OS.

If you are using Windows 7 or older Operating Systems AND this card support the older OS, you may use the provided CD drivers or access the product page for your card to download the older drivers.

If you are not sure and run into a problem, please write to support@vantecusa.com for further assistance.

About Warranty, Repair process (RMA), RMA closed status, and Register product [#33410]

About warranty:

All our standard products comes with 1 year warranty. Some special products may have longer warranty, please check the product page for more information.

If you have questions about our product, please contact our support team for assistance. You can reach them via the contact form located in Menu "About Us", select the Region and select "Product Support". They are very helpful and can answer and assist with our products.

Here are the steps for warranty repair. You can use this link below or you can contact RMA our website main page, select Support pull down menu and pick RMA Center. In the RMA Center page select Warranty Service, "End User" to begin.

https://www.vantecusa.com/rma.php

Normal RMA returns for repair.

1)            Submit the online RMA request above.
2)            Wait for the RMA to be approved. You will get notification of the approval via email. (Check your spam folder if it did not show within 2 hours.)
3)            Follow the instruction in the RMA email. Pack well and send back the defective unit. (You pay for shipping to us)
4)            We wait for the unit to arrive.
5)            Once here, we replace the unit and send replacement unit back to you. (We pay for shipping to you)
6)            RMA case close.

Register Products:

You do not need to register the product. For warranty purpose we require the invoice or proof of purchase.

You can do the following:

If you purchase it from a store and have the physical receipt, take a clear picture of the receipt, email to yourself and save it in your email warranty folder (create one if you do not have one).
If you purchase it online, you can save the invoice email to your email warranty folder.
If you purchase online, the online store may have your purchase history that may help.

With this you will have a central place for all your receipts.

All products warranty is for one year, if you do not need them any more after a year clear that email.

Dual Chip 4-Port Dedicated 10Gbps USB 3.1 Gen 2 PCIe Host Card

About warranty:

Normal RMA returns for repair.

Register Products: