NexStar SX, USB 4, 40Gbps, M.2 NVMe Enclosure

Home / Products / Hard Drive Enclosures / 2.5" Enclosures / NexStar SX, USB 4, 40Gbps, M.2 NVMe Enclosure

NexStar SX, USB 4, 40Gbps, M.2 NVMe Enclosure
NST-M240C4
Coming Soon
- Tooless Design, Quick and Easy Install or Upgrade
- USB 4, 40Gbps, native C, No driver needed, plugged & read
- Easy and Fast Data Access to Big capacity M.2 NVMe
- Designed for Video Editing, Backup purposes and/or Secondary Storage
- Compatible with all M.2 NVMe of sizes 2230, 2242, 2260, 2280
- Use as a Data recovery tool and/or Transfer data between drives
- Compatible with All Latest OS with USB support, UASP, BOT, TRIM
Questions? Email to Support@vantecusa.com

BUY NOW
- fb
- g+
- tt

Highlight
Spec
Support
FAQ

This Enclosure is designed for Speed, Using M.2 NVMe Modules up to 16TB, maybe more later. The whole enclosure is designed to be the heatsink for the M.2 NVMe in the Enclosure, no drivers are required, Plugged and Ready, and supports all current OS available on the marketplace.

Features:
- Tooless Design, Quick and Easy Install or Upgrade
- USB 4, 40Gbps, native C, No driver needed, plugged & read
- Easy and Fast Data Access to Big capacity M.2 NVMe
- Designed for Video Editing, Backup purposes and/or Secondary Storage
- Compatible with all M.2 NVMe of sizes 2230, 2242, 2260, 2280
- Use as a Data recovery tool and/or Transfer data between drives
- Compatible with All Latest OS with USB support, UASP, BOT, TRIM
Note: For Maximum 40Gbps support, your USB 4 port must support 40Gbps. Please check with your system manufacturer to make sure it is capable of 40Gbps and power requirement from your USB C port.

Model: NST-M240C4

USB Connector: Native USB C, USB 4 (USB reversible connector)

Device Connectors: M.2 NVMe

M.2 Size Support: 2230, 2242, 2260, 2280

Drive Capacity: User may put up to 16TB ** (could be more later)

Power Supply: ** Bus Powered

Material: Aluminum

Item Dimensions (L x W x H): 4.76 x 2.86 x 0.93 inches / 120.9 x 72.6 x 23.7 mm

Item Weight: 10.2 oz. / 289 g

Cable Type and length: USB C to C (40Gbps), 8.75 inches / 222.25 mm

OS Support: Windows 10/11, Mac OS X 10.10 or higher, and Linux OS

** IMPORTANT NOTE: Tested maximum capacity. The User system USB port MUST provide enough power to the user M.2 NVMe module. If the user system USB port cannot provide enough power to the M.2 NVMe, it will not work. For Maximum 40Gbps support, your USB 4 port must support 40Gbps. Please check with your system manufacturer to make sure your USB port is capable of 40Gbps speed. Not all Thunderbolt port will support USB 4 and/or 40Gbps speed. 40Gbps refer to theoretical speed, actual speed may vary.

System Requirements:

USB 4, Type-C port for Max usage of speed
Newer OS like Windows 10/11, OS X 10.10, latest Linux

Package Contents:

1 x USB 4 NVMe Enclosure
USB C to C cable (Power and Data)
Quick Install Guide

UPC: 844767023885

EAN: 4716872104123

Country of Origin: Made in Taiwan

Warranty: 1 year parts and labor

Shipping:

Package Dimensions (L x W x H): 140 x 3.54 x 1.77 inches / 140 x 90 x 45 mm

Package Weight: (11 oz /327 g)

Carton Dimensions (LxWxH): ?? x ?? x ?? inches / ?? x ?? x ?? cm

Carton Weight: ???? (lbs/Kg)

Carton Quantity (units): ?? Unit per carton

Environmental:

Operating Temperature 0 ℃ to +45℃

Operating Humidity 10% to 85 % RH (no condensation)

Storage Temperature -10℃ to +70℃

Storage Humidity 5% to 90% RH (no condensation)

Driver

Manual

Datasheet

How to prepare a New Storage, Hard Drive, or SSD for use with a system? [#33406]

There are two set of instruction. One for Windows OS and another for OS X. Please use the right set of instruction for your System.

Click to download instruction (pdf) for steps to prepare a new drive for use

What is Prop 65 and the warning on Vantec products packaging? [#02012020]

What is Proposition 65?

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects, or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals.

Why the Prop 65 warning label?

Warnings are based on a compile list of chemicals published by the State of California (over 800 and growing) which may pose an increased risk of cancer and/or reproductive harm if exposed to minimum levels, also known as Safe Harbor levels are exceeded. These warnings are widespread within California and can be found across many industries including food and beverage sales, clothing sales, furniture sales, automotive repair, electronics, etc.

Should I be concerned about the safety of your products?

Although you should always be aware and take notice of any product warning, a Prop 65 warning does not mean that a product is unsafe. The State of California’s website states, “A Prop 65 warning does not necessarily mean that a product violates any product-safety standards or requirements.”

For more information please refer to this link: https://www.p65warnings.ca.gov/

The Product is not work working correctly, what should I do? [#21034]

Sometime problems may occur during first installation or use, we at VantecUSA like to help you get it working to resolve the problem. We have a team of support staff that is here to help you. Please write to us first before you return the product back to the place of purchase. We are committed to help you get the product setup and working correctly. You can reach us via email at support@vantecusa.com. We will reply to you very quickly to assist you.

Best Regards,

VantecUSA Customer Service Team.

About Warranty, Repair process (RMA), RMA closed status, and Register product [#33410]

About warranty:

All our standard products comes with 1 year warranty. Some special products may have longer warranty, please check the product page for more information.

If you have questions about our product, please contact our support team for assistance. You can reach them via the contact form located in Menu "About Us", select the Region and select "Product Support". They are very helpful and can answer and assist with our products.

Here are the steps for warranty repair. You can use this link below or you can contact RMA our website main page, select Support pull down menu and pick RMA Center. In the RMA Center page select Warranty Service, "End User" to begin.

https://www.vantecusa.com/rma.php

Normal RMA returns for repair.

1)            Submit the online RMA request above.
2)            Wait for the RMA to be approved. You will get notification of the approval via email. (Check your spam folder if it did not show within 2 hours.)
3)            Follow the instruction in the RMA email. Pack well and send back the defective unit. (You pay for shipping to us)
4)            We wait for the unit to arrive.
5)            Once here, we replace the unit and send replacement unit back to you. (We pay for shipping to you)
6)            RMA case close.

Register Products:

You do not need to register the product. For warranty purpose we require the invoice or proof of purchase.

You can do the following:

If you purchase it from a store and have the physical receipt, take a clear picture of the receipt, email to yourself and save it in your email warranty folder (create one if you do not have one).
If you purchase it online, you can save the invoice email to your email warranty folder.
If you purchase online, the online store may have your purchase history that may help.

With this you will have a central place for all your receipts.

All products warranty is for one year, if you do not need them any more after a year clear that email.

Warranty replacement process [#33413]

Here are the steps when requesting for warranty replacement:

1) Start the RMA process.

     We offer 1 year warranty for this product. If it is within 1 year, you can contact RMA through our website using the Online RMA link.

  https://www.vantecusa.com/rma.php

     After submitting, you should get an approval within 24 hours (check your spam folder, to make sure it did not end up in the spam folder)

2) After you have gotten the RMA number, follow the instruction in the approval email, the prep the unit and send it back to us (you pay for shipping back to us).

3) Once we have received the defective unit, we replace the unit and send it back. (we pay for shipping back to you).

4) You can check on the status of this process by emailing to rma@vantecusa.com for more information on the status.

NexStar SX, USB 4, 40Gbps, M.2 NVMe Enclosure

Questions? Email to Support@vantecusa.com

About warranty:

Normal RMA returns for repair.

Register Products: